FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

International Harvester / Farmall 560 Parts

Category: Fuel System / Air Intake

[Categories] [All 560 Parts] [All Farmall Models]

Air Cleaner Bowl - Clear plastic pre-cleaner bowl for the air intake system. Bowl outside diameter at top approximately 7-1/4 inch, side height 3 inches, cone inside diameter at top 3-1/2 inch, overall height 4-1/8 inch. Commonly used on pipe inlets ranging from 2-3 inches. For tractors: M, MD, WR9S, Super WD9, 400, 450, W400, W450, 460, 504, 544 diesel, 455 diesel, 2544 diesel, 5606, Gas powered combines: 403 and 453 Hillside, 503, 615, 715. Can replace Donaldson P02-0227, also replaces 101965A, 10P871, 1125804, 1508881M1, 3119347, 365413R1, 71125804, 73186, 73533, 80073533, C0NN9A663A, F3446R, L60631, R28794 (Item #: 157279, Ref: R28794) $8.80

Cable - Choke - For International / Farmall tractor models 560 (Farmall, s/n 501-14818), 560 (s/n 501-2070), 660 (s/n 501-1348), Replaces International OEM number 374254R91, 371278R91, Length: 71", (Item #: 161902) $31.90

Carburetor Float - Float. For Updraft International Carburetors with throat size 1-1/4 inch or 1-3/8 inch. Dimensions: 2 3/16 inch length x 1 3/16 inch height, outside diameter 3 1/2 inches. For 2606, 2706, 300, 350, 400, 450, 460, 560, 600, 606, 650, 660, 706, M, MV, O6, OS6, Super H, Super HV, Super M, Super MTA, Super W6, Super W6TA, W400, W450, W6, W9, WR9, WR9S. (Item #: 107990, Ref: 47398DX) $20.20

Carburetor Fuel Line Fitting With Strainer - Fits INTERNATIONAL carburetors: 356948R92, 35865R91, 366066R91, 367258R92, 367259R92, 372723R92, 378196R94, 379813R91, 380956R91, 381984R91, 388297R92, 388424R92, 388425R96, 390082R92, 396197R93, 45108DB, 45108DC, 50981DA, 50981DB, 50983DB, 52714D, 52814DA, 52815D, 52815DA, 533622R91, 53873DF, 53873DH, 539575R91, 56543DE, 60329DA. 1/4 inch pipe to�5/16 inch flare. (Item #: 111514, Ref: 29902DX) $16.50

Carburetor Kit, Basic - Kit for IHC 406804R91, 361525R92, 363741R93, 367258R92, 380956R96, 381984R95, 386424R96, 388297R94, 372723R92, 379813R95, 396197R93, 539575R91, 388425R96, 533622R91, 358065R91, 358554R91, 356948R92, 357231R92 carbs on 2544, 300, 350, 460, 544, 560, 656, 660, 706, 756, 766, 806, Super H, Super M, Super W-4. (Item #: 100731, Ref: IH103) $17.50

Carburetor Kit, Complete - For IH Carburetor number: 367259R92, 372723R93. Includes all parts shown. Used on 560, 660. (Item #: 184716, Ref: R7863) $57.00

Carburetor Repair Kit - Basic carburetor repair kit for International carburetors. Fits International carburetor number 381984R91. Fits tractor model: 560. (Item #: 112357, Ref: BK16V) $35.30

Carburetor Repair Kit, Complete - Comprehensive Carburetor Kit for IH Carburetor number 367259R92. Contains all parts shown. For tractor model 560. (Item #: 184581, Ref: R7864) $80.00

Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: 367259R92, 368141R1, 387182R92, 381984R92, 532832R91. For the following tractor models: 560. Add $200.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 203325, Ref: 1442-CARB) $325.00

Choke Cable - 71 inches total length. For tractor models (Farmall 400, 450), 460 Grove, (Farmall 560 serial number 14819 and up, IH 560 serial number 2071 and up), (660 serial number 1349 and up), (706, 756, 806, 826, 856 all LP). Replaces 363710R93. (Item #: 113396, Ref: 374218R92) $20.10

Diesel Fuel Filter - Fuel filter element, cartridge type, final filter. For 2504, 2606, 2656, 2706, 2806, 330, 340, 460, 504, 560, 606, 656, 660, 706, 806. Replaces 610309C91 (Item #: 111124, Ref: 304101R91) $18.10

Fuel Injection Line #3, Used - For International tractor models 460, 560, 606, 660, 706, 2606, 2706, Compatible with International Harvester(s) 414, 420, Compatible with International Engine(s) D236, D282, D301, Replaces International OEM number 278704R11, For a new version of this item use Item #: 162714, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 441152) $16.01

Fuel Injection Pump, Remanufactured, Roosa Master, DBGFC631-49AE - For International / Farmall tractor model 560, Replaces Roosa Master manufacturer number DBGFC631-49AE, DBGFC631-1AE, DBGFC631-26AE, (Item #: 200688) $1310.01

Fuel Line With FTG - Fuel line for gas engines is 41 inches long. These gas lines easily flex, eliminates metal tubing, vibration. For 460, 560, 706, 806 (Item #: 112539, Ref: FLM41) $29.10

Fuel Pipe Coupling Nut - For International / Farmall tractor models A, B, C, Cub, Cub Lo-Boy, F12, F14, H, HV, I4, I6, I9, M, MD, MTA, O4, O6, Super A, Super C, Super H, Super M, Super W4, TD6, TD9, W4, W6, W12, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 444, 450, 460, 504, 560, 600, 606, 650, 656, 660, 686, 706, 756, 806, 826, 856, 2444, 3514, 3616, Compatible with International Combine (s) 303, 403, 503, 615, 715, Replaces International OEM number 29899D, 700155R11, 700153R11, 1/2"-20 Hi-duty tube fitting, 5/16" O.D., (Item #: 112642) $2.40

Fuel Sending Unit - With Seal. For GAS tractor models 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 21026, 21206, 21256, 21456, (2544 gas), 2656, 2706, 2756, 2806, 2826, 2856, (544 gas), 560, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 966, Hydro 100, Hydro 70, Hydro 86. NOT COMPATIBLE WITH ETHANOL BLENDS. Replaces: 5378427R1, 378427R92, 378427R93, 378427R94 (Item #: 107954, Ref: 378427R94) $43.00

Fuel Sending Unit - Stewart Warner - For International / Farmall tractor models 444, 460, 560, 660 (use with Stewart Warner Gauge 369607R93), Compatible with International Construction and industrial models 2444, Replaces International OEM number 1341373C1, 369608R92, 32 Ohm full to 244 Ohm empty, Will not work with aftermarket gagues, Some applications may require adjusting the limiting tab for full gauge reading., Use 151009 for tractors with Rochester gauges, (Item #: 119749) $60.00

$Farmall 560 Fuel Stop\Shutoff Cable$
Fuel Stop/Shutoff Cable - For International / Farmall tractor models 460 (s/n 9242-later), 560, 656, 660, 2656, Replaces International OEM number 374220R91, 372423R91, 374221R91, If replacing 374221R91 or 372423R91 you may need to cut cable to length, Overall Length: 77-1/2", Mount to Mount: 27-1/2", (Item #: 128530) $23.80

No
Picture
Fuel Strainer Assembly - For H, M, MD, 460, 560, 660, 656. Fuel Strainer Assembly. Single 1/8" pipe connection. S61581 (Item #: 105393, Ref: I379832R91) $22.00

$Farmall 560 Fuel Strainer\Water Trap Bail$
Fuel Strainer/Water Trap Bail - For International / Farmall tractor models MD, Super MTA, TD6, WD6, WD9, 400, 450, 460, 560, 606, 660, Compatible with International Harvester (s) 616, 622, Replaces International OEM number 370785R91, 165373H1, 60878DX, 54760D, (Item #: 126522) $43.60

Injection Line, Cylinder 1 - For tractor models (460, 606 with D236 engine), (560, 660 with D282), (656, 706 with D282 engine and Roosa Master Pump). Nut 250617R2 and sleeve 250610R2 not included, sold separately. Replaces 278702R11 (Item #: 162712, Ref: 278702R21) $26.60

Injection Line, Cylinder 2 - For tractor models (460, 606 with D236 engine), (560, 660 with D282), (656, 706 with D282 engine and Roosa Master Pump). Nut 250617R2 and sleeve 250610R2 not included, sold separately. (Item #: 162713, Ref: 278703R11) $19.90

Injection Line, Cylinder 3 - For tractor models (460, 606 with D236 engine), (560, 660 with D282), (656, 706 with D282 engine and Roosa Master Pump). Nut 250617R2 and sleeve 250610R2 not included, sold separately. (Item #: 162714, Ref: 278704R11) $20.90

Injection Line, Cylinder 4 - For tractor models (460, 606 with D236 engine), (560, 660 with D282), (656, 706 with D282 engine and Roosa Master Pump). Nut 250617R2 and sleeve 250610R2 not included, sold separately. (Item #: 162715, Ref: 278705R11) $25.60

Injection Line, Cylinder 5 - For tractor models (460, 606 with D236 engine), (560, 660 with D282), (656, 706 with D282 engine and Roosa Master Pump). Nut 250617R2 and sleeve 250610R2 not included, sold separately. (Item #: 162716, Ref: 278706R11) $25.30

Injection Line, Cylinder 6 - For tractor models (460, 606 with D236 engine), (560, 660 with D282), (656, 706 with D282 engine and Roosa Master Pump). Nut 250617R2 and sleeve 250610R2 not included, sold separately. (Item #: 162717, Ref: 278707R11) $30.40

Injector - This remanufactured injector comes as pictured with injector, o-ring and 2 metal flat washers. For tractor models 340, 460, 560, 656, 660, (706 with D282 engine). Replaces 279263R91, 310388R91. DOES NOT INCLUDE GLOW PLUG OEM part number 304131R2. Refundable $75 core charge will be added to your order. Replaces 310389R1, 332496R91, 7332495, 332495R91, 332495R91 (Item #: 204407, Ref: 332495R91) $162.01

Injector Nozzle - For tractor models 454, (464 up to serial number 027205 with nozzle number DLLA150S417), 544, 560, 574, 656, 660, 664, 674, 706, 786, 826, (886 serial number 14472 and up), 2544, 2656, 2706, 2826. (Item #: 179950, Ref: 3055428R92) $37.80

No
Picture
Nut, Injection Pipe, Nozzle End - Replaces 250617R1, 74504409, 12627A, 367339R1, for tractor models 460, 606, 560, 660, 656, 706. (Item #: 162719, Ref: 250617R2) $7.20

Sediment Bowl Assembly - Used on Diesel Tractor Models 2606, 460, 560, 606 and 660, this replaces OEM part number 370074R91 (Item #: 184421, Ref: 370074R91) $123.00

Sediment Bowl Assembly - Fuel Strainer assembly with 2.25 inch bowl, 1/8 inch pipe thread to fuel line, 3/8 inch pipe to tank for gasoline tractors: H, HV, M, Super M and MTA, O4, OS4, W4, 460, 560, 600, 650, 656, 660, 706, 756, 766, 806, 826, 856. Replacement bowl available as part S.65504. Replaces OEM numbers 358245R91 and 370832R91. (Item #: 105393, Ref: S.61581) $22.00

No
Picture
Sediment Bowl Assembly - For International / Farmall tractor models M, MD, MDV, MV, 460, 560, 656, 660, 706, 766, 806, 826, 856, 2826, 2856, Replaces International OEM number 358245R91, 362040R91, 370832R91, 61782C91, Replaces OEM number 13194D, 70208205, 70237946, 70239167, 5/8" x 18 Pitch Male Thread, Short Bowl Type, Outside Diameter: 2 1/8", (Item #: 177024) $49.70

Sediment Bowl Assembly Glass Bowl - Glass bowl with an outside diameter is 2 1/8 and an overall height of 2 3/8. For the following models using a 2 3/8 inch tall glass bowl: O12, O14, O4, O6, OS4, OS6, T340, T5, T6 (up to serial number 29964), W12, W14, W30, Super W4, W4, W40, Super W6, Super W6TA, W6, Super W9, W9, WR9S, F12, F14, F20, F30, 100, 130, 140, 200, 230, 300, 340, 350, 400, W400, 450, W450, 460, 560, 656, 660, 706, 756, 766, 806, 826, 856. Replaces 51344VA and 357957R1. (Item #: 105365, Ref: S.65504) $5.50

Sediment Bowl Gasket and Screen - This is a 2 Inch Outside Diameter Gasket and Screen. The Screen has a 3/8 Inch center hole. Replaces: 13194D, 25854, 49923D (Item #: 105364, Ref: 49923D) $3.50

No
Picture
Sleeve, Injection Pipe - Replaces 250610R1, for tractor models 460, 606, 560, 660, 656, 706. (Item #: 162718, Ref: 250610R2) $6.90

No
Picture
Throttle Friction Disc - This Throttle Friction Disc measures 0.165 of an inch thick, 1.960 inches outside diameter and has a center hole of 0.530 of an inch diameter. For models 240, 2400A, 2424, 2444, 2500A, 2504, 2544, 2656, 274, 284, 340, 3444, 404, 424, 444, 454, 460, 464, 484, 504, 544, 560, 574, 584, 606, 656, 660, 664, 674, 684, 784, 884 and Hydro 84. Also replaces 388632R1, 394716R1 and 399168R1. (Item #: 178163, Ref: 369463R1) $6.10

Universal Parts and Accessories
Category: Fuel System / Air Intake

Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231) $14.00

Choke Cable - Universal choke cable 72 inches long, 7/16 inch thread diameter. Being a universal may or may not look like the picture. May say "Choke" or "C" or nothing. (Item #: 178125, Ref: CC72) $19.50

No
Picture
Choke Cable Swivel - Choke cable swivel attaches the choke inner cable to the choke lever. Used on tractors with a choke cable. (Item #: 184016, Ref: CT28-49) $15.76

Engine Heater, Tank Type - 1500 watt tank type engine heater with built-in thermostat, plugs into any 110-120 volt AC receptacle. For use on 30-40 quart capacity liquid cooled engines. (Item #: 107378, Ref: GE1500) $109.00

$Farmall 560 Fuel Filter Kit, In-Line, 5\16 inch$
Fuel Filter Kit, In-Line, 5/16 inch - Inlet 5/16 inch, outlet 5/16 inch, outside diameter 1-29/32 inches, length 4-5/32 inches. Contains: Filter, 2 - hoses, 4 - clamps. (Item #: 119295, Ref: BF840) $6.30

$Farmall 560 Fuel Filter, In-Line, 1\4 inch$
Fuel Filter, In-Line, 1/4 inch - Inlet 1/4 inch, outlet 1/4 inch, outside diameter 1-29/32 inches, length 4-1/16 inches. (Item #: 119294, Ref: 6511393) $7.60

$Farmall 560 Fuel Filter, In-Line, 3\8 inch$
Fuel Filter, In-Line, 3/8 inch - Inlet 3/8 inch, outlet 3/8 inch, outside diameter 1-29/32 inches, length 3-7/8 inches. (Item #: 120082, Ref: BF836) $6.80

$Farmall 560 Fuel Filter, In-Line, 5\16 inch, Clear$
Fuel Filter, In-Line, 5/16 inch, Clear - Inlet 5/16 inch, outlet 5/16 inch, outside diameter 2-1/8 inches, length 3-21/32 inches. (Item #: 110863, Ref: BF7736) $4.80

Fuel Tank Liner - For all fuel tanks. One quart Fuel Tank Liner covers tanks up to 12 gallons. Once cleaned, this tank liner will prevent further corrosion inside your tank. (Item #: 107976, Ref: R2043) $71.00

Fuel Tank Liner Kit - Works on all metal gas tanks. use with gas or diesel fuels. Kit includes 1 qt cleaner, 1 qt prep solvent, and 1 qt tank liner which covers tanks up to 12 gallons. Includes application instructions. (Item #: 112528, Ref: NR1259) $109.00

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.92

Fuel Tank Webbing, 3 Ft - Black woven nylon type material measures .042 inches thick, 15/16 inches wide and 3 foot section. (Item #: 178009, Ref: FTW494) $5.40

Lucas Fuel Treatment (quart) - Lucas Fuel Treatment is formulated for both gasoline and diesel engines, carbureted or fuel injected. It gives your fuel system what it really needs - a blend of super slick oils and additives with a high detergent action that allows the engine to operate at maximum efficiency. Also, it cleans and lubricates the carburetor and injectors and causes the fuel to burn more thoroughly for increased power and less fuel consumption. Lucas Fuel Treatment should definitely be used in vehicles that require leaded fuel because it actually replaces the benefits of lead in gasoline without causing harmful emissions. Use it to pass smog tests. Finally, it totally neutralizes the harmful effects of low sulfur diesel fuel.A powerful blend of oils and additives that contain no SOLVENTS. Designed to increase power and fuel mileage and also lower exhaust emissions through a more complete combustion. (Item #: 180786, Ref: LU10003) $13.30

Main Fuel Valve - This main fuel valve replaces the original fuel solenoid for International carburetors. The original fuel solenoids are very unreliable and can easily be replaced with this manual valve. This assembly contains: the valve, graphite packing, and packing nut. Used on Carburetors: 50981DC, 45108DB, 50983DC, 52814DA, 47387DC, 361525R92, 358065R92, 362173R92, 367259R92, 380956R91, 380956R92, 380956R93, 381983R91, 381984R95, 389511R92, 367258R92, 396966R91, 388296R91, 388424R96, 396197R96, 396198R92, 381419R91, 397224R93, 381420R91, 357231R91, 356948R92. Replaces 47404DA, 374327R1, 362526R1, 362525R1 (Item #: 117537, Ref: 47404DASSY) $30.10

Main Load Adjusting Needle Assembly - Used on Marvel Schebler carburetors TSX181, TSX221, TSX245, TSX332, TSX360, TSX374, TSX397, TSX413, TSX436, TSX505, TSX526, TSX530, TSX633, TSX641, TSX688, TSX689, TSX756, TSX768, TSX777, TSX792, TSX797, TSX97, this part replaces OEM numbers 10P70, 43-613, 43-622, 43-678, 43-699, RE9051. Verify your carburetor is among those listed before ordering. (Item #: 111767, Ref: CT43-622) $52.00

Pre Cleaner Assembly with Pipe - By removing larger particles, these pre-cleaners will not only prolong serviceability of expensive air filters but minimize machinery downtime as well as extending engine life. This assembly has a 2 inch pipe inside diameter, 6 inch bowl and is 11-1/2 inches tall. Note that this is sold as a universal part, not specific to any model. Verify measurements before ordering. (Item #: 185438, Ref: S66397) $20.20

Pre Cleaner Assembly with Pipe - By removing larger particles, these pre-cleaners will not only prolong serviceability of expensive air filters but minimize machinery downtime as well as extending engine life. This assembly has a 2.25 inch pipe inside diameter, 7 inch bowl and is 9-1/2 pipe. Note that this is sold as a universal part, not specific to any model. Verify measurements before ordering. (Item #: 185439, Ref: C0NN9A660A) $33.30

Pre Cleaner Assembly, Turbo 2-3 Inch - By removing larger particles, these pre-cleaners will not only prolong serviceability of expensive air filters but minimize machinery downtime as well as extending engine life. Intake: 51, 57, 64, 71, 76mm (2-3 inch) with multiple adapters. This is a universal part sold by size and not specified for any particular model. Please verify measurements before ordering (Item #: TPC23) $94.68

Pre Cleaner Assembly, Turbo 5 Inch - By removing larger particles, these pre-cleaners will not only prolong serviceability of expensive air filters but minimize machinery downtime as well as extending engine life. Intake: 5 inch pipe. This is a universal part sold by size and not specified for any particular model. Please verify measurements before ordering (Item #: TPC5) $137.82

$Farmall 560 Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.30

Stop Cable - This red knobbed Pull to Stop cable can be used as a stop cable, choke cable or any other functioning cable up to 72 inches in length. It does have a red pull knob that reads, "Pull to Stop". It has a usable cable length of 72 inches. (Item #: 109399, Ref: PTSTOP) $10.80

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Fuel System / Air Intake

[Categories] [All 560 Parts] [All Farmall Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy